Glass door locks are still very common. Generally, where a glass door is installed, you will see a sliding lock installed in the middle or under the door, which facilitates our travel and protects indoor items. When installing a glass door, ordinary locks are difficult to install on the glass door. Even if some locks can be installed, it will affect the appearance of the entire door. Use the sliding lock on the frameless glass door. Glass doors without a frame need accessories to assist in installation. The installation method is basically the same as the surface installation method of ordinary doors, but it is different when installing the iron plate in the third step. Put the sliding lock together with the rubber cushion and the stainless steel gasket (placed on the side of the lock screw). On the glass door, lock the glass door with a headless Allen screws, and then fix the relay plate on the sliding lock. Use the AB frame to install, first fix the AB frame on the glass door with special glass glue (or double-sided tape), and then fix the relay plate on the bracket. You can tilt and turn. The sliding lock of the glass door needs to be installed with an aluminum alloy frame. Because the lock and spacing requirements are less than 6 mm, the distance between the door edge and the door frame is required to be less than 6 mm, and the floor spring must have The center of gravity is stable, otherwise it will affect the positioning of the lock. If it is not positioned properly, the lock will be easily deformed and will not be used smoothly.